| Test Criteria |
Testing Devices |
Equipment Accuracy / Data |
Standards |
| Dimension [mm] |
Accurate Micrometer |
Accuracy Class 1 |
DIN 863 Part 3 Typ D.13 |
| Tensile Strength [N/mm2] |
Tension Testing Machine |
Accuracy Class 05 acc. to EN ISO 7500 |
DIN EN 10002 Part 1 |
| Elongation [%] |
Tension Testing Machine |
Reading Accurancy: ± 1%.
Test Length: Lo = 100 mm
alternatively: Lo = 254 mm |
DIN EN 10002 Part 1 |
| Coating Thickness [µm] |
Couloscope |
± 10% depending on Conditions |
DIN EN ISO 2177 |
| X-Ray Spectrometer |
DIN EN ISO 3497 |
| Coating Composition [%] |
X-Ray Spectrometer |
± 10% depending on Conditions |
DIN EN ISO 3497 |
| Surface |
Stereo-Microscope |
30 x Magnification |
Internal Specification |
| Solderability % |
Solder-Melting Pot Stereo-Microscope |
Ageing 16 h at 155°C in air
Solder bath 235 ± 5°C
Alloy: Sn/Pb = 60/40 in non activated flux,
Dipping Depth 60 mm |
DIN IEC 68 Ta Part 2-20 Meth. 1, Ageing 3 MIL 202 E, Meth. 208C |
| Coating Adhesion |
Winding Mandrel |
Wire Ø < 1,00 mm :
Mandrel Ø = 1,00 mm,
Wire Ø > 1,00 mm:
Mandrel Ø = Wire Ø
10 tight Windings |
Internal Specification |
| Stereo-Mircroscope |
Microscope: 30 x Magnification |
All testing equipment is subject to periodic monitoring in accordance with our Quality Management System DIN EN ISO 9001:2000.
Stringent quality inspections are performed in each phase of production. These strict production controls ensure consistently
high quality. All measurements are recorded and filed for minimum 15 years.
Quality DIN EN ISO 9001:2000
Environment DIN EN ISO 14001:2004
Occupational Health and Safety OHSAS 18001
